manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 283 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 283

6 43

Driving your vehicle

WARNING

If your vehicle becomes stuck in
snow, mud, sand, etc., then you
may attempt to rock the vehicle
free by moving it forward and
backward. Do not attempt this
procedure if people or objects
are anywhere near the vehicle.
During the rocking operation the
vehicle may suddenly move for-
ward of backward as it becomes
unstuck, causing injury or dam-
age to nearby people or objects.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments