manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 281 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 281

6 41

Driving your vehicle

Shift-lock override

If the shift lever cannot be moved
from the P (Park) position into R
(Reverse) position with the brake
pedal depressed, continue depress-
ing the brake, then do the following:

Type A

1. Press the shift-lock release button.
2. Move the shift lever.
3. Have the system inspected by a

professional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

Type B

1. Place the ignition switch in the

LOCK/OFF position.

2. Apply the parking brake.
3. Carefully remove the cap (1) cov-

ering the shift-lock release access
hole.

4. Insert a tool (e.g. flathead screw-

driver) into the access hole and
press down on the tool.

5. Move the shift lever.
6. Remove the tool from the shiftlock

override access hole then install
the cap.

7. Have the system inspected by a

professional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

Ignition key interlock system 
(if equipped)

The ignition key cannot be removed
unless the shift lever is in the P
(Park) position.

OBD058006R

■

Type A

■

Type B

OBD058091R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments