manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 263 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 263

6 23

Driving your vehicle

Automatic transaxle operation

The automatic transaxle has 6 for-
ward speeds and one reverse speed.
The individual speeds are selected
automatically, depending on the
position of the shift lever.

✽

✽

NOTICE

The first few shifts on a new vehicle,
if the battery has been disconnected,
may be somewhat abrupt. This is a
normal condition, and the shifting
sequence will adjust after shifts are
cycled a few times by the TCM
(Transaxle Control Module) or
PCM (Powertrain Control Module).

AUTOMATIC TRANSAXLE (IF EQUIPPED)

OBD058005R

+ (UP)

- (DOWN)

The shift lever can be shifted freely.

Press the lock release button when shifting.

Depress the brake pedal and the lock release button when shifting.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments