manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 248 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 248

Driving your vehicle

8

6

Starting the engine

WARNING

- Ignition

switch

• Never turn the ignition switch

to LOCK or ACC whilst the
vehicle is moving. This would
result in loss of directional
control and braking function,
which could cause an accident.

• The anti-theft steering column

lock is not a substitute for the
parking brake. Before leaving
the driver’s seat, always make
sure the shift lever is engaged
in 1st gear for the manual
transaxle, set the parking
brake fully and shut the
engine off. Unexpected and
sudden vehicle movement
may occur if these precau-
tions are not taken.

(Continued)

(Continued)
• Never reach for the ignition

switch, or any other controls
through the steering wheel
whilst the vehicle is in motion.
The presence of your hand or
arm in this area could cause a
loss of vehicle control, an
accident and serious bodily
injury or death.

• Do not place any movable

objects around the driver’s
seat as they may move whilst
driving, interfere with the driv-
er and lead to an accident.

WARNING

• Always wear appropriate

shoes when operating your
vehicle.

Unsuitable shoes

(high heels, ski boots,etc.)
may interfere with your ability
to use the brake and accelera-
tor pedal, and the clutch (if
equipped).

• Do not start the vehicle with

the accelerator pedal
depressed. The vehicle can
move and lead to an accident.

• Wait until the engine rpm is nor-

mal. The vehicle may suddenly
move if the brake padel is
released when the rpm is high.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments