manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 247 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 247

6 7

Driving your vehicle

Ignition switch position

LOCK

The steering wheel locks to protect
against theft. The ignition key can be
removed only in the LOCK position.

ACC (Accessory)

The steering wheel is unlocked and
electrical accessories are operative.

✽

✽

NOTICE

If difficulty is experienced turning
the ignition switch to the ACC posi-
tion, turn the key whilst turning the
steering wheel right and left to
release the tension.

ON

The warning lights can be checked
before the engine is started. This is
the normal running position after the
engine is started.
Do not leave the ignition switch ON if
the engine is not running to prevent
battery discharge.

START

Turn the ignition switch to the START
position to start the engine. The
engine will crank until you release
the key; then it returns to the ON
position. The brake warning light can
be checked in this position.

KEY POSITIONS

OYB057001

OYB056068

■

Type A

■

Type B

ACC

ON

START

LOCK

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments