manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 245 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 245

6 5

Driving your vehicle

Before entering vehicle

• Be sure that all windows, outside

mirror(s), and outside lights are
clean.

• Check the condition of the tyres.
• Check under the vehicle for any

sign of leaks.

• Be sure there are no obstacles

behind you if you intend to back up.

Necessary inspections  

Fluid levels, such as engine oil,
engine coolant, brake fluid, and
washer fluid should be checked on a
regular basis, with the exact interval
depending on the fluid. Further
details are provided in chapter 8,
“Maintenance”.

Before starting 

• Close and lock all doors.
• Position the seat so that all con-

trols are easily reached.

• Adjust the inside and outside

rearview mirrors.

• Be sure that all lights work.
• Check all gauges.
• Check the operation of warning

lights when the ignition switch is
turned to the ON position.

• Release the parking brake and

make sure the brake warning light
goes out.

For safe operation, be sure you are
familiar with your vehicle and its
equipment.

BEFORE DRIVING

WARNING

Driving whilst distracted can
result in a loss of vehicle control,
that may lead to an accident,
severe personal injury, and death.
The driver's primary responsibili-
ty is in the safe and legal opera-
tion of a vehicle, and use of any
handheld devices, other equip-
ment, or vehicle systems which
take the driver's eyes, attention
and focus away from the safe
operation of a vehicle or which
are not permissible by law should
never be used during operation
of the vehicle.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments