Kia Cerato 2019 Owner'S Manual Download Page 235

Page: 235 / 617

Audio system

Contacts

Press the

[PHONE]

button

Select

[Contacts].
Displays the list of Contacts. Select
from the list to dial the number.

Displays Menu Popup when pressing
the

[MENU]

button.

• Download: Downloads contacts

from your Bluetooth

device.

Requesting download

Some devices require a device
authentication for downloading your
call history and contacts.
If download fails, check the
Bluetooth

device settings or the

screen state.

✽

NOTICE

• Only supported contacts format

can be downloaded and displayed
from the Bluetooth device, con-
tacts from some applications will
not be included.

• Up to 2000 phone numbers can be

downloaded from a single, paired
Bluetooth

device.

• You cannot edit or delete down-

loaded phone numbers from your
car.

• Contacts can be viewed only when

the Bluetooth

device is connect-

ed.

• Even if the Bluetooth

device is

disconnected, the downloaded
data will remain. (Note that delet-
ing a paired device will also delete
all downloaded Contacts and call
history data)

• Downloaded phone numbers may

be lost depending on the condition
of the head unit. Keep your impor-
tant data in a safe place.

• The status bar displays a (

)

whilst downloading contacts.

(Continued)

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 235 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: