manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 234 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 234

Audio system

5 28

✽

✽

NOTICE

• Up to 20 favorites can be saved in

favorites of each device.

• Downloading favorites in your

Bluetooth

®

device does not be sup-

ported.

• To save favorite, contacts should

be downloaded.

• Contact saved in favorites will not

be automatically updated if the
contact has been updated in the
phone. To update favorites, delete
the favorite and create a new
favorite.

Call history

Press the 

[PHONE] 

button 

Select

[Call History].
Displays all of your call history. Select
from the list to dial the number.

Displays Menu Popup when pressing
the 

[MENU]

button.

• Download: Downloads the call his-

tory information from your
Bluetooth

®

device.

• All Calls: Lists the all call history.
• Dialed Calls: Lists the calls that

you made.

• Received Calls Lists the calls that

you have received.

• Missed Calls: Lists the calls you

missed.

✽

✽

NOTICE

• Call history may not be saved in

the call history list in some
Bluetooth

®

devices.

• Calls from restricted ID’s are not

saved in the call history list.

• Up to 50 calls can be added in each

dialed calls/Received calls/Missed
calls list.

• The durations of each

dialed/received call are not dis-
played in your car’s call history
list.

• Whilst the call history download is

in progress, the status bar displays
an icon (

).

• If the call history download is

turned off on the Bluetooth

®

device, the call history download
will fail.

• Some devices require a device

authentication for downloading
your call history. If download fails,
check if the Bluetooth

®

settings or

display status are normal.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments