Kia Cerato 2019 Owner'S Manual Download Page 233

Page: 233 / 617

Audio system

✽

NOTICE

• Only one Bluetooth

device can be

connected at a time.

• Bluetooth

features supported

within the vehicle are as follows.
Some features may not be sup-
ported depending on your
Bluetooth

device.

- Outgoing/Incoming Handsfree

calls

- Operations during a call: Switch

to Private, Switch to call wait-
ing, Microphone on/off

- Downloading Call history
- Downloading Contacts
- Bluetooth

device Auto

Connection

- Bluetooth

Audio streaming

Bluetooth

Phone

Bluetooth

Phone

Press the

[PHONE]

button.

Displays Phone Menu screen. The
connected device name is displayed
in the top of the display.

•

: Call signal strength indicator

•

: Battery level of the Bluetooth

devices connected

Favorites

Press the

[PHONE]

button

Select

[Favorites].
Lists the phone numbers saved as
favorites. Select from the list to dial
the number.

Displays Menu Popup when pressing
the

[MENU]

button.

• Add New Favorites: Adds a phone

number to favorites.

• Delete Items: Deletes numbers

that you select from favorites.

• Delete All: Deletes all of the num-

bers from favorites.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 233 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: