Kia Cerato 2019 Owner'S Manual Download Page 222

Page: 222 / 617

Audio system

5 16

Range of supported file types

1. Bitrate range (Kbps)

2. Bit Per Sample range (bit)

3. Sampling frequency (Hz)

• For MP3/WMA compression files

and WAV file, differences in sound
quality will occur depending on the
bitrate. (Higher sound quality can
be experienced with higher
bitrates.)

• This device only recognizes files

with MP3/WMA/WAV extensions.
Other file extensions may not be
properly recognized.

4. Maximum number of recognized

folders and files

• Folder: 1,000 folders for USB
• File: 5,000 files for USB
• There are no limitations to the

number of recognized folder levels

5. Text Display (Based on Unicode)
• Filenames: Maximum 40 English

characters

• Foldernames:

Maximum 40

English characters

✽

NOTICE

Using the scroll feature allows you to
see the entire name of files with
names that are too long to be dis-
played at once.

Language Support (Unicode Support)

• Korean: 2,604 characters
• English: 94 characters
• Common Chinese characters:

4,888 characters

• Special symbols: 986 characters

✽

NOTICE

Japanese/Simplified Chinese char-
acters are not supported.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 222 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: