manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 221 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 221

Audio system

15

5

FM/AM Mode

Displays Menu Popup when pressing
the 

[MENU]

button.

Traffic Announcement

TA(Traffic announcement) feature
On/Off.

Presets

Displays saved presets.

Autostore

• Saves broadcasts with superior

reception to 

[1] ~ [6]

buttons.

• If no frequencies are received,

then the most recently received
frequency will be broadcast.

Scan

The broadcast frequency increases
and previews each broadcast for 5
seconds each. After scanning all fre-
quencies, returns and plays the cur-
rent broadcast frequency.

Sound Settings

Moves to Sound settings.

Media

✽

✽

NOTICE - 

Using MP3

Supported audio formats

✽

✽

NOTICE

File formats that do not comply with
the above formats may not be prop-
erly recognized or play without
properly displaying file names or
other information.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments