manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 213 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 213

Audio system

7

5

iPod

®

iPod

®

is a trademark of Apple Inc.

Bluetooth

®

Wireless Technology

The Bluetooth

®

word mark and logos are registered

trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by Kia is under license. Other trademarks
and trade names are those of their respective owners.

A 

Bluetooth

®

Wireless Technology enabled cell phone is

required to use 

Bluetooth

®

Wireless Technology.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments