manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 204 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 204

Clothes hanger

To use the hanger, pull down the
upper portion of hanger.

WARNING

Do not hang other objects such
as hangers or hard objects
except clothes. Also, do not put
heavy,

sharp or breakable

objects in the clothe pockets. In
an accident or when the curtain
air bag is inflated, it may cause
vehicle damage or personal
injury.

OPS046500

(Continued)
• The indicator light of some

manufacturers’ smart phones
may still be yellow after the
smart phone is fully charged.
This is due to the particular
characteristic of the smart
phone and not a malfunction of
the wireless charging.

• When any smart phone without

a wireless charging function or
a metallic object is placed on
the charging pad, a small noise
may sound.This small sound is
due to the vehicle discerning
compatibility of the object
placed on the charging pad. It
does not affect your vehicle or
the smart phone in any way.

CAUTION

Do not hang heavy clothes,
since those may damage the
hook.

OYB046450

4 184

Features of your vehicle

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments