manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 201 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 201

4 181

Features of your vehicle

Wireless smart phone charg-
ing system (if equipped)

A wireless smart phone charging
system located in front of the centre
console.
Firmly close all doors, and turn the
ignition to ACC or IGN ON. To start
wireless charging, place the smart
phone equipped with wireless charg-
ing function on the wireless charging
pad.

OBD048404R

CAUTION

• Used the USB car charger with

the ignition on. Otherwise,
Vehicle battery can be dis-
charged.

• Use the official USB cable of

the manufacturer of the digital
device to be charged.

• Make sure that any foreign

object, drinks, and water do
not come into contact with the
USB car charger. Water or for-
eign object can damage the
USB charger.

• Do not use the device those

current consumption exceeds
2.1A.

• Do not connect an electrical

device that generates exces-
sive electromagnetic noise to
the USB car port. If you do so,
noise can be caused or vehi-
cle electronic devices can be
interrupted whilst audio or AV
is on.

(Continued)

(Continued)
• If the charger is connected

incorrectly, it can cause seri-
ous damage on the devices.
Please note that damages due
to incorrect usage are not cov-
ered by warranty service.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments