manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 200 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 200

Features of your vehicle

180

4

USB charger (if equipped)

The USB car charger allows drivers
to charge their digital devices like
smartphone, and PC tablets.
Connect the cable to the USB port,
charging will begin.

The USB car charger is available
with either the ACC state or the igni-
tion on. But we recommend you to
connect the USB port and digital
devices with the engine starting. See
the display screen of the device to
check its charging process comple-
tion. Your smartphone or table PC
could get heated up whilst charging.
This is no reason to worry, as it does-
n’t impact life or functions of the
device. For the safety reason, charg-
ing can be stopped if the battery gets
heated up to a certain point of tem-
perature that the devices can be
negatively affected. Charging some
digital devices is not available or
requires special dedicated adapters
if their charging methods don’t fit the
way the USB car charger works.
Quick Charge 2.0 is available on the
smartphone or the table PC
equipped with fast charging capabili-
ties. The applicable is as follows:
(https://www.qualcomm.com/docu-
ments/quick-charge-device-list)
The smartphone or PC tablet without
fast charging is charged at a regular
speed.

Rated output:
Digital devices with fast charging :
- 9.0 V, 1.67 A 
Digital devices with normal charging :
- 5.0 V, 2.1 A

OBD048026R

OBD048083R

■

Front

■

Centre

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments