manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 198 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 198

Features of your vehicle

178

4

Seat cooler (Air ventilation seat)
(if equipped)

The temperature setting of the seat
changes according to the switch
position.
• If you want to warm your seat cush-

ion, press the switch (red colour).

• If you want to cool your seat cush-

ion, press the switch (blue colour).

• Each time you press the button,

the airflow will change as follows:

• The seat warmer (with air ventila-

tion) defaults to the OFF position
whenever the ignition switch is
turned on.

Power outlet (if equipped)

The power outlet is designed to pro-
vide power for mobile telephones or
other devices designed to operate
with vehicle electrical systems. The
devices should draw less than 10
amps with the engine running.

OBD048022R

OBD048025R

CAUTION

When cleaning the seats, do not
use an organic solvent such as
paint thinner, benzene, alcohol
and petrol. Doing so may dam-
age the surface of the heater or
seats.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments