manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 195 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 195

4 175

Features of your vehicle

Sliding armrest (if equipped)

To move forward

Grab the front portion of the armrest
then press up the lever (1) and pull it
forward

To move rearward

Push the armrest rearward with your
palm.

Sunvisor

Use the sunvisor to shield direct light
through the front or side windows.
To use the sunvisor, pull it down-
ward.
To use the sunvisor for the side win-
dow, pull it downward, unsnap it from
the bracket (1) and swing it to the
side (2).
To use the vanity mirror, pull down
the visor and slide the mirror cover
(3).
The ticket holder (4) is provided for
holding a tollgate ticket. (if equipped)

OBD048021R

OBD048098R

WARNING

Do not grab the front portion of
the armrest (1) when moving
the armrest rearward. It may
pinch your fingers.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments