manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 189 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 189

4 169

Features of your vehicle

These compartments can be used to
store small items required by the
driver or passengers.

Centre console storage 
(if equipped)

These compartments can be used to
store small items required by the
driver or front passenger.
To open the centre console storage
pull up the lever.

STORAGE COMPARTMENTS 

WARNING - 

Flammable
materials

Do not store cigarette lighters,
propane cylinders, or other
flammable/explosive materials
in the vehicle. These items may
catch fire and/or explode if the
vehicle is exposed to hot tem-
peratures for extended periods.

CAUTION

• To avoid possible theft, do not

leave valuables in the storage
compartments.

• Always keep the storage com-

partment covers closed whilst
driving. Do not attempt to
place so many items in the
storage compartment that the
storage compartment cover
cannot close securely.

OBD048016R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments