manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 174 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 174

Features of your vehicle

154

4

Mode selection

The mode selection button controls
the direction of the air flow through
the ventilation system.
The air flow outlet port is converted
as follows:

Refer to the illustration in the
“Manual climate control system”.

Floor & Defrost (A, C, D, E, F)

Most of the air flow is directed to the
floor and the windscreen with a small
amount directed to the side window
defrosters.

Face-Level (B, D, F)

Air flow is directed toward the upper
body and face. Additionally, each out-
let can be controlled to direct the air
discharged from the outlet.

Bi-Level (B, D, C, E, F)

Air flow is directed towards the face
and the floor.

Floor-Level (C, A, D, E, F)

Most of the air flow is directed to the
floor, with a small amount of the air
being directed to the windscreen and
side window defrosters.

OBD048314

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments