manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 173 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 173

4 153

Features of your vehicle

✽

✽

NOTICE

Never place anything over the sen-
sor located on the instrument panel
to ensure better control of the heat-
ing and cooling system.

Manual heating and air condi-
tioning

The heating and cooling system can
be controlled manually by pushing
buttons other than the AUTO button.
In this case, the system works
sequentially according to the order of
buttons selected.
When pressing any button (or turning
any knob) except the AUTO button
whilst using automatic operation, the
functions not selected will be con-
trolled automatically.

1. Start the engine.
2. Set the mode to the desired posi-

tion.

To improve the effectiveness of

heating and cooling:
- Heating:
- Cooling:

3. Set the temperature control to the

desired position.

4. Set the air intake control to the

outside (fresh) air position.

5. Set the fan speed control to the

desired speed.

6. If air conditioning is desired, turn

the air conditioning system on.

Press the AUTO button in order to
convert to full automatic control of
the system.

OBD048014

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments