manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 165 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 165

4 145

Features of your vehicle

Fan speed control

The ignition switch must be in the ON
position for fan operation.
The fan speed control knob allows
you to control the fan speed of the air
flowing from the ventilation system.
To change the fan speed, turn the
knob to the right for higher speed or
left for lower speed.
Setting the fan speed control knob to
the “0” position turns off the fan.

To turn off the blowers

To turn off the blowers, turn the fan
speed control knob to the “0” posi-
tion.

OBD048310

OBD048310L

WARNING

• Continue using the climate

control system in the recircu-
lated air position may allow
humidity to increase inside
the vehicle which may fog the
glass and obscure visibility.

• Do not sleep in a vehicle with

the air conditioning or heating
system on. It may cause seri-
ous harm or death due to a
drop in the oxygen level
and/or body temperature.

• Continue using the climate

control system in the recircu-
lated air position can cause
drowsiness or sleepiness,
and loss of vehicle control.
Set the air intake control to
the outside (fresh) air position
as much as possible whilst
driving.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments