manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 164 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 164

Features of your vehicle

144

4

Air intake control 

The air intake control is used to
select the outside (fresh) air position
or recirculated air position.
To change the air intake control posi-
tion, press the control button.

Recirculated air position      

With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat-
ing system and heated
or cooled according to
the function selected.

Outside (fresh) air position  

With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.

✽

✽

NOTICE

Prolonged operation of the heater in
the recirculated air position (with-
out air conditioning selected) may
cause fogging of the windscreen and
side windows and the air within the
passenger

compartment may

become stale.
In addition, prolonged use of the air
conditioning with the recirculated
air position selected will result in
excessively dry air in the passenger
compartment. 

OBD048307

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments