manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 163 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 163

4 143

Features of your vehicle

Instrument panel vents

- Type A
The outlet vents can be opened or
closed separately using the thumb-
wheel. To close the vent, rotate it
downward to the maximum position.
Also, you can adjust the direction of
air delivery from these vents using
the vent control lever as shown.

- Type B
The outlet vents can be opened or
closed separately turning the knob
right or left. Also, you can adjust the
direction of air delivery from these
vents moving the knob freely to any
directions.

Temperature control

The temperature control knob allows
you to control the temperature of the
air flowing from the ventilation sys-
tem. To change the air temperature in
the passenger compartment, turn
the knob to the right position for
warm and hot air or left position for
cooler air.

OBD048306

OBD048305R

OBD048308

OBD048309

■

Type B

■

Type A

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments