manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 157 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 157

4 137

Features of your vehicle

Vanity mirror lamp 
(if equipped)

Push the switch to turn the light on or
off.
• 

: The lamp will turn on if this

button is pressed.

• 

: The lamp will turn off if this

button is pressed.

CAUTION

The trunk/luggage room lamp
comes on as long as the trunk
(tailgate) opens. To prevent
unnecessary charging system
drain, close the trunk (tailgate)
securely after using the
trunk/luggage room.

OBD048062R

CAUTION

- Vanity mirror lamp 

Always have the switch in the
off position when the vanity mir-
ror lamp is not in use. If the sun-
visor is closed without the lamp
off, it may discharge the battery
or damage the sunvisor.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments