Kia Cerato 2019 Owner'S Manual Download Page 156

Page: 156 / 617

Features of your vehicle

136

✽

NOTICE

The DOOR mode and ROOM mode
can not be selected at a time.

Front Map Lamp:

•

(3): Press this switch to turn the

front map lamps on.

•

(4): Press this switch to turn the

front map lamps off.

Room lamp

•

: The light stays on at all times.

Trunk/luggage room lamp

The trunk/luggage room lamp comes
on when the trunk (tailgate) is
opened.

OBD048059

OBD048060

OBD048420L

■

4 Door

■

5 Door

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 156 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: