manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 149 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 149

4 129

Features of your vehicle

Also, the rear fog lights turn on when
the rear fog light switch is turned on
after the front fog light switch (if
equipped) is turned on and the head-
light switch is in the parklight position.
To turn the rear fog lights off, turn the
rear fog light switch to the on position
again.

✽

✽

NOTICE

To turn on the rear fog light switch,
the ignition switch must be in the
ON position. 

Daytime running light 
(if equipped)

The Daytime Running Lights (DRL)
can make it easier for others to see
the front of your vehicle during the
day. DRL can be helpful in many dif-
ferent driving conditions, and it is
especially helpful after dawn and
before sunset.
The DRL system turns OFF when:
1. The headlight switch is ON.
2. The engine is OFF.
3. The front fog light is on.
4. Engaging the parking brake.

Headlight levelling device
(if equipped)

To adjust the headlight beam level
according to the number of the pas-
sengers and loading weight in the
luggage area, turn the beam levelling
switch.
The higher the number of the switch
position, the lower the headlight
beam level. Always keep the head-
light beam at the proper levelling
position, or headlights may dazzle
other road users.

OBD048400R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments