manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 143 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 143

4 123

Features of your vehicle

The high beam indicator will light
when the headlight high beams are
switched on. To prevent the battery
from being discharged, do not leave
the lights on for a prolonged time
whilst the engine is not running.

To flash the headlights, pull the lever
towards you. It will return to the nor-
mal (low beam) position when
released. The headlight switch does
not need to be on to use this flashing
feature.

High Beam Assist 
(if equipped)

The High Beam Assist is a system
that automatically adjusts the head-
lamp range (switches between high
beam and low beam) according to
the brightness of other vehicles and
road conditions.

WARNING

Do not use high beam when
there are other vehicles. Using
high beam could obstruct the
other driver's vision.

OYB046418

OUM044058R

■

Type A

■

Type B

OBD048406R

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments