manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 141 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 141

4 121

Features of your vehicle

Parking light position (

)

When the light switch is in the park-
ing light position (3rd position), the
tail position, license and instrument
panel lights will turn ON.

Headlight position (

)

When the light switch is in the head-
light position (4th position), the head,
tail, position, license and instrument
panel lights are ON.

✽

✽

NOTICE

The ignition switch must be in the
ON position to turn on the head-
lights.

OYB046410

OYB046410R

■

Type A

■

Type B

OYB046412

OYB046412R

■

Type A

■

Type B

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments