manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 137 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 137

4 117

Features of your vehicle

Self-diagnosis

When you shift the gear to the R
(Reverse) position and if one or more
of the below occurs you may have a
malfunction in the rear parking dis-
tance warning.
• You don't hear an audible warning

sound or if the buzzer sounds inter-
mittently.

If this occurs, have the system
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

WARNING

Your new vehicle warranty does
not cover any accidents or dam-
age to the vehicle or injuries to
its occupants related to a park-
ing distance warning. Always
drive safely and cautiously.

(blinks)

•

is displayed. (if equipped)

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments