manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 127 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 127

4 107

Features of your vehicle

ECO Mode Indicator
Light (if equipped)

This indicator light illuminates: 

• When you select “ECO” mode as

drive mode.

❈

For more details, refer to “Drive
Mode Integrated Control System”
in chapter 6.

SPORT Mode Indicator
Light (if equipped)

This indicator light illuminates:

• When you select “SPORT” mode

as drive mode.

❈

For more details, refer to “Drive
Mode Integrated Control System”
in chapter 6.

SMART Mode Indicator
(if equipped)

This indicator light illuminates:

• When you select “SMART” mode

as drive mode.

❈

For more details, refer to “Drive
Mode Integrated Control System”
in chapter 6.

Cruise
Indicator Light 
(if equipped)

This indicator light illuminates:

• When the cruise control system is

enabled.

❈

For more details, refer to “Cruise
Control System” in chapter 6.

KEY OUT Indicator Light
(if equipped)

When the ENGINE START/STOP
button is in the ACC or ON position,
if any door is open, the system
checks for the smart key.

This indicator light blinks:

When the smart key is not in the
vehicle and any door is open with the
ignition switch or Engine Start/Stop
button  in the ACC or ON position.
- At this time, if you close all doors,

the chime will also sound for
approximately 5 seconds.

- The indicator will go off whilst the

vehicle is moving.

KEY

OUT

CRUISE

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments