manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 125 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 125

4 105

Features of your vehicle

Low Beam Indicator
Light (if equipped)

This indicator light illuminates:

• When the headlights are on.

High Beam Indicator
Light

This indicator light illuminates:

• When the headlights are on and in

the high beam position.

• When the turn signal lever is pulled

into the Flash-to-Pass position.

Light ON Indicator Light

This indicator light illuminates:

• When the tail lights or headlights

are on.

Front Fog Indicator
Light (if equipped)

This indicator light illuminates:

• When the front fog lights are on.

Rear Fog Indicator Light 
(if equipped)

This indicator light illuminates:

• When the rear fog lights are on.

High Beam Assist 
indicator (if equipped)

This warning light illuminates : 

• When the high-beam is on with the

light switch in the AUTO light posi-
tion.

• If your vehicle detects oncoming or

preceding vehicles, the high beam
assist system  will switch the high
beam to low beam automatically.

❈

For more details, refer to “High
beam assist” in this chapter.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments