manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 124 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 124

104

4

Features of your vehicle

Immobiliser Indicator
Light (With Smart Key)
(if equipped)

This indicator light illuminates for up
to 30 seconds:

• When the vehicle detects the

smart key in the vehicle properly
whilst the Engine Start/Stop Button
is ACC or ON.
- At this time, you can start the

engine.

- The indicator light goes off after

starting the engine.

This indicator light blinks for a few
seconds:

• When the smart key is not in the

vehicle.
- At this time, you can not start the

engine.

This indicator light illuminates for 2
seconds and goes off:

• When the vehicle can not detect

the smart key which is in the vehi-
cle whilst the Engine Start/Stop
Button is ON.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

This indicator light blinks:

• When the battery of the smart key

is weak.
- At this time, you can not start the

engine. However, you can start the
engine if you press the Engine
Start/Stop Button with the smart
key. (For more details, refer to
“Starting the Engine” in chapter 6).

• When there is a malfunction with

the immobiliser system.
In this case, have the vehicle
inspected by a professional work-
shop. Kia recommends to visit an
authorised Kia dealer/service part-
ner.

Turn Signal Indicator
Light

This indicator light blinks:

• When you turn the turn signal light

on.

If any of the following occurs, there
may a malfunction with the turn sig-
nal system. In this case, have the
vehicle inspected by a professional
workshop. Kia recommends to visit
an authorised Kia dealer/service
partner.

- The indicator light does not blink

but illuminates.

- The indicator light blinks more

rapidly.

- The indicator light does not illumi-

nate at all.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments