Kia Cerato 2019 Owner'S Manual Download Page 121

Page: 121 / 617

4 101

Features of your vehicle

LED Headlamp Warning
Light (if equipped)

This warning light illuminates:

• Once you set the Engine Start/Stop

Button to the ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the LED headlamp.

In this case, Kia recommends to visit
an authorised Kia dealer/service
partner.

This warning light blinks:

• When there is a malfunction with a

LED headlamp related part.

In this case, Kia recommends to visit
an authorised Kia dealer/service
partner.

✽

NOTICE

Continuous driving with the LED
Headlamp Warning Light on or
blinking can reduce LED headlamp
(low beam) life.

Forward Collision-
Avoidance Assist (FCA)
Warning light (if
equipped)

This indicator light illuminates:

• When there is a malfunction with

the Forward Collision-Avoidance
Assist (FCA) system.

In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

Door Ajar Warning Light
(if equipped)

This warning light illuminates:

When a door is not closed securely.

Trunk/tailgate Open
Warning Light
(if equipped)

This warning light illuminates:

When the trunk/tailgate is not closed
securely.

Washer Fluid Warning
Light (if equipped)

This warning light illuminates:

• When the washer fluid level in the

reservoir is nearly empty.
In this case, you should refill the
washer fluid.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cerato 2019

Reviews:

Kia Cerato 2019, Owner'S Manual, Page: 121 / 617

Search results

Summary of Contents for Cerato 2019

Reviews: