manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 111 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 111

4 91

Features of your vehicle

Parking Brake & Brake
Fluid Warning Light

This warning light illuminates:

• Once you set the ignition switch or

Engine Start/Stop Button to the ON
position.
- It illuminates for approximately 3

seconds

- It remains on if the parking brake

is applied.

• When the parking brake is applied.
• When the brake fluid level in the

reservoir is low.
- If the warning light illuminates

with the parking brake released, it
indicates the brake fluid level in
reservoir is low.

If the brake fluid level in the reservoir
is low:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. With the engine stopped, check

the brake fluid level immediately
and add fluid as required (For
more details, refer to “Brake Fluid”
in chapter 8). Then check all brake
components for fluid leaks. If any
leak on the brake system is still
found, the warning light remains
on, or the brakes do not operate
properly, do not drive the vehicle.

In this case, have the vehicle
towed to a professional workshop
and inspected. Kia recommends to
visit an authorised Kia dealer/serv-
ice partner.

Dual-diagonal braking system

Your vehicle is equipped with dual-
diagonal braking systems. This
means you still have braking on two
wheels even if one of the dual sys-
tems should fail.
With only one of the dual systems
working, more than normal pedal
travel and greater pedal pressure are
required to stop the vehicle.
Also, the vehicle will not stop in as
short a distance with only a portion
of the brake system working.
If the brakes fail whilst you are driv-
ing, shift to a lower gear for addition-
al engine braking and stop the vehi-
cle as soon as it is safe to do so.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments