manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 108 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 108

88

4

Features of your vehicle

Low urea (for diesel engine)

This warning message illuminates if
the urea solution level in the urea
solution tank is nearly empty.
- When the SCR warning light is illu-

minates.

Refill urea solution as soon as possible.

❈

For more details, refer to "Selective
Catalytic Reduction" in the chapter
8.

Check urea system (for diesel engine)

This warning message illuminates if
the urea system has a malfunction.
In this case, have the urea system
checked by a professional workshop.
Kia recommends to visit an autho-
rised Kia dealer/service partner.

❈

For more details, refer to "Selective
Catalytic Reduction" in the chapter
8.

Check BCW

(Blind-Spot Collision

Warn.) (if equipped)

This warning message is displayed if
there is a problem with the Blind-Spot
Collision Warning (BCW) system. In
this case, have the vehicle inspected
by a professional workshop. Kia rec-
ommends to visit an authorised Kia
dealer/service partner.

❈

For more information, refer to
“Blind-Spot Collision Warning
(BCW)” in chapter 6.

Check Driver Attention Warning (DAW)
System (if equipped)

This warning message is displayed if
there is a problem with the Driver
Attention Alert System. In this case,
have the vehicle inspected by a pro-
fessional workshop. Kia recom-
mends to visit an authorised Kia
dealer/service partner.

❈

For more information, refer to
“Driver Attention Warning (DAW)”
in chapter 6.

Check HBA (High Beam Assist)
system (if equipped)

• This warning message illuminates

if the high beam assist system has
a malfunction.

In this case, have the vehicle inspect-
ed by a professional workshop. Kia
recommends to visit an authorised
Kia dealer/service partner.

Check FCA (Forward Collision
Avoidance Assist) (if equipped)

• This warning message illuminates

if there is a malfunction with the
Forward Collision Avoidance Assist
(FCA) system. In this case, have
the vehicle inspected by a profes-
sional workshop. Kia recommends
to visit an authorised Kia
dealer/service partner.

❈

For more details, refer to "Forward
Collision Avoidance Assist(FCA)
system" in chapter 6.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments