manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 105 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 105

4 85

Features of your vehicle

Engine has overheated 

• This warning message illuminates

when the engine coolant tempera-
ture is above 120°C (248°F). This
mean that the engine is overheat-
ed and may be damaged.

❈

If your vehicle is overheated, refer
to “Overheating” in chapter 7.

Low Key Battery 
(for smart key system)

• This warning message illuminates

if the battery of the smart key is
discharged when the Engine
Start/Stop Button changes to the
OFF position.

Press START button whilst turning
wheel (for smart key system)

• This warning message illuminates

if the steering wheel does not
unlock normally when the Engine
Start/Stop Button is pressed.

• It means that you should press the

Engine Start/Stop Button whilst
turning the steering wheel right
and left.

Steering wheel unlocked 
(for smart key system)

• This warning message illuminates

if the steering wheel does not lock
when the Engine Start/Stop Button
changes to the OFF position.

Check steering wheel lock system 
(for smart key system)

• This warning message illuminates

if the steering wheel does not lock
normally when the Engine
Start/Stop Button changes to the
OFF position.

Shift to P(for smart key system and
automatic transaxle / dual clutch trans-
mission)

• This warning message illuminates

if you try to turn off the engine with-
out the shift lever in P (Park) posi-
tion.

• At this time, the Engine Start/Stop

Button turns to the ACC position (If
you press the Engine Start/Stop
Button once more, it will turn to the
ON position).

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments