manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 104 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 104

84

4

Features of your vehicle

Warning messages

Warning messages appear on the
LCD to warn the driver. It is located in
the centre of the instrument cluster.
The warning message may appear
differently depending on the type of
instrument cluster and some may not
show the warning message at all.
The warning message is shown in
either symbol, symbol and text, or
text type only.

Door, bonnet, trunk/tailgate open 

• This warning is displayed indicat-

ing which door, or the bonnet, or
the trunk/tailgate is open.

Sunroof open (if equipped) 

• This warning is displayed if you turn

off the engine when the sunroof is
open.

OBD048123

OBD048124

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments