manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 103 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 103

4 83

Features of your vehicle

Service interval 

• Service Interval 

To activate or deactivate the serv-
ice interval function.

• Adjust Interval 

To adjust the interval by mileage
and period.

• Reset

To reset the service interval function.

Other Features 

• Fuel Economy Auto Reset 

- If this item is checked, the aver-

age fuel economy will reset auto-
matically after refuelling or after
ignition.

• Fuel Economy Unit 

- Choose the fuel economy unit.

(km/L, L/100km)

• Temperature Unit 

- Choose the temperature unit.

(°C,°F)

• Tyre Pressure Unit (if equipped)

- Choose the tyre pressure unit.

(psi, kPa, bar)

Language (if equipped)

Choose the language 

Reset 

You can reset the menus in the User
Settings Mode. All menus in the User
Settings Mode are initialized, except
language and service interval.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments