manualshive.com logo in svg

Kia Cerato 2019, Owner'S Manual, Page: 1 / 617

Share
Download
Kia Cerato 2019 Owner'S Manual Download Page 1

Kia, THE COMPANY

Enjoy your vehicle and Kia’s “Family-like Care” experience!

Thank you for becoming the owner of a new Kia vehicle.

As a global car manufacturer focused on building high-quality, value for
money prices, Kia Motors is dedicated to providing you with a customer
service experience that exceeds your expectations.

At all of our Kia dealerships you will be treated with warmth, hospitality
and professionalism by people who care based on our 

“Family-like Care”

promise.

All information contained in this Owner’s Manual is accurate at the time of
publication. However, Kia reserves the right to make changes at any time
so that our policy of continual product improvement can be carried out.

This manual applies to all trims of this vehicle and includes images,
descriptions, and explanations of optional as well as standard equip-
ment. As a result, some material in this manual may not be applicable
to your specific Kia vehicle. Some images are shown for illustration
only and may show features that differ from those on your vehicle.

Summary of Contents for Cerato 2019










































































































































































































































































































































































































































































































































































































































Reviews:

No comments