manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 546 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 546

5. Remove  the  high  mounted  stop

lamp  assembly  (A)  after  loosening

the nuts and washer nozzle (B).

6. Reinstall  a  new  lamp  assembly  in

the reverse order of removal.

• 2 Door

If  the  light  bulb  does  not  operate,

have  your  vehicle  checked  by  a  pro‐

fessional  workshop.  Kia  recommends

to visit an authorized Kia dealer/serv‐

ice partner. A skilled technician should

check  or  repair  the  high  mounted

stop light, for it may affect the per‐

formance  of  the  curtain  airbags  or

damage  related  interior  parts  of  the

vehicle.

License plate lamp bulb

replacement

1. Remove the cover by pressing it as

direction of the arrows.

2. Remove  the  socket  by  turning  it

counterclockwise.

3. Remove  the  bulb  by  pulling  it

straight out.

4. Install a new bulb.
5. Reinstall the bulb assembly secure‐

ly with the retaining screws.

Maintenance

 

 

8-88

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments