Kia CERATO 2018 Owner'S Manual Download Page 528

Page: 528 / 602

LIGHT BULBS

WARNING

Working on the lights

Prior to working on the light, firmly

apply the parking brake, ensure that

the ignition switch is turned to the

LOCK position and turn off the lights

to avoid sudden movement of the

vehicle and burning your fingers or

receiving an electric shock.

Use only the bulbs of the specified wat‐

tage.

CAUTION

Be sure to replace the burned-out

bulb with one of the same wattage

rating. Otherwise, it may cause

damage to the fuse or electric wiring

system.

CAUTION

The headlight aiming adjustment

may be necessary after the head‐

light assembly is reinstalled. If you

are unsure how to replace or aim the

headlight, consult a professional

workshop. Kia recommends to con‐

sult an authorized Kia dealer/service

partner.

CAUTION

• If you don’t have necessary tools,

the correct bulbs and the exper‐

tise, consult a professional work‐

shop. Kia recommends to consult

an authorized Kia dealer/service

partner. In many cases, it is diffi‐

cult to replace vehicle light bulbs

because other parts of the vehicle

must be removed before you can

get to the bulb. This is especially

true if you have to remove the

headlight assembly to get to the

bulb(s).

Removing/installing the headlight

assembly can result in damage to

the vehicle.

• Do not install additional bulb or

LED. If you install that, the lamp

may not be operated properly and

fuse box or electric wiring system

may have problem.

Maintenance

8-70

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 528 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: