Kia CERATO 2018 Owner'S Manual Download Page 493

Page: 493 / 602

AIR CLEANER

Filter replacement

It must be replaced when necessary,

and should not be washed.

You can clean the filter when inspecting

the air cleaner element.

Clean the filter by using compressed

air.

1. Loosen the air cleaner cover at‐

taching clips and open the cover.

2. Wipe the inside of the air cleaner.
3. Replace the air cleaner filter.

4. Lock the cover with the cover at‐

taching clips.

Replace the filter according to the

Maintenance Schedule.

If the vehicle is operated in extremely

dusty or sandy areas, replace the ele‐

ment more often than the usual rec‐

ommended intervals. (Refer to Main‐

tenance under severe usage conditions

on page 8-17.)

CAUTION

• Do not drive with the air cleaner

removed; this will result in exces‐

sive engine wear.

• When removing the air cleaner fil‐

ter, be careful that dust or dirt

does not enter the air intake, or

damage may result.

• Use parts for replacement from a

professional workshop. Kia recom‐

mends to visit an authorized Kia

dealer/service partner.

8-35

Maintenance

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 493 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: