Kia CERATO 2018 Owner'S Manual Download Page 490

Page: 490 / 602

WASHER FLUID

Checking the washer fluid level

The reservoir is translucent so that you

can check the level with a quick visual

inspection.

Check the fluid level in the washer fluid

reservoir and add fluid if necessary.

Plain water may be used if washer fluid

is not available. However, use washer

solvent with antifreeze characteristics

in cold climates to prevent freezing.

WARNING

Coolant

• Do not use radiator coolant or an‐

tifreeze in the washer fluid reser‐

voir.

• Radiator coolant can severely ob‐

scure visibility when sprayed on

the windshield and may cause loss

of vehicle control or damage to

paint and body trim.

• Windshield Washer fluid agents

contain some amounts of alcohol

and can be flammable under cer‐

tain circumstances. Do not allow

sparks or flame to contact the

washer fluid or the washer fluid

reservoir. Damage to the vehicle or

occupants could occur.

• Windshield washer fluid is poison‐

ous to humans and animals. Do

not drink and avoid contacting

windshield washer fluid. Serious

injury or death could occur.

Maintenance

8-32

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 490 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: