manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 451 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 451

Jack label

❈

The  actual  Jack  label  in  the  vehicle

may differ from the illustration. For

more  detailed  specifications,  refer

to the label attached to the jack.

1. Model Name
2. Maximum allowable load
3. When using the jack, set your park‐

ing brake.

4. When  using  the  jack,  stop  the  en‐

gine.

5. Do  not  get  under  a  vehicle  that  is

supported by a jack.

6. The designated locations under the

frame

7. When  supporting  the  vehicle,  the

base  plate  of  jack  must  be  vertical

under the lifting point.

8. Shift  into  Reverse  gear  on  vehicles

with  manual  transmission  or  move

the shift lever to the P position on

vehicles  with  automatic  transmis‐

sion.

9. The  jack  should  be  used  on  firm

level ground.

10. Jack manufacturer
11. Production date
12. Representative  company  and  ad‐

dress

 

 

7-19

7

What to do in an emer

gency

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments