manualshive.com logo in svg

Kia CERATO 2018, Owner'S Manual, Page: 446 / 602

Share
Download
Kia CERATO 2018 Owner'S Manual Download Page 446

Removing and storing the spare

tire

Turn  the  tire  hold-down  wing  bolt

counterclockwise.

Store  the  tire  in  the  reverse  order  of

removal.

To  prevent  the  spare  tire  and  tools

from  "rattling"  while  the  vehicle  is  in

motion, store them properly.

Changing tires

1. Park  on  a  level  surface  and  apply

the parking brake firmly.

2. Shift  the  shift  lever  into  R  (Re‐

verse)  with  manual  transaxle  or  P

(Park)  with  automatic  transaxle  /

dual clutch transmission.

3. Activate  the  hazard  warning  flash‐

er.

4. Remove  the  wheel  lug  nut  wrench,

jack,  jack  handle,  and  spare  tire

from the vehicle.

5. Block  both  the  front  and  rear  of

wheel  that  is  diagonally  opposite

the jack position.

WARNING

n

Changing a tire

(Continued)

What to do in an emergency

 

 

7-14

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Reviews:

No comments