Kia CERATO 2018 Owner'S Manual Download Page 436

Page: 436 / 602

IF THE ENGINE WILL NOT START

If engine doesn't turn over or

turns over slowly

1. If your vehicle has an automatic

transaxle / dual clutch transmis‐

sion, be sure the shift lever is in N

(Neutral) or P (Park) and the emer‐

gency brake is set.

2. Check the battery connections to

be sure they are clean and tight.

3. Turn on the interior light. If the

light dims or goes out when you

operate the starter, the battery is

discharged.

4. Check the starter connections to be

sure they are securely tightened.

5. Do not push or pull the vehicle to

start it. See instructions for Jump

starting on page 7-05.

WARNING

If the engine will not start, do not

push or pull the vehicle to start it.

This could result in a collision or

cause other damage. In addition,

push or pull starting may cause the

catalytic converter to be overloaded

and create a fire hazard.

If engine turns over normally

but does not start

1. Check the fuel level.
2. With the ignition switch in the LOCK

position, check all connectors at the

ignition coils and spark plugs. Re‐

connect any that may be discon‐

nected or loose.

3. Check the fuel line in the engine

compartment.

4. If the engine still does not start, call

a professional workshop. Kia rec‐

ommends to call an authorized Kia

dealer/service partner.

What to do in an emergency

7-04

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 436 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: