Kia CERATO 2018 Owner'S Manual Download Page 432

Page: 432 / 602

VEHICLE WEIGHT

This section will guide you in the proper

loading of your vehicle and/or trailer, to

keep your loaded vehicle weight within

its design rating capability, with or

without a trailer. Properly loading your

vehicle will provide maximum return of

the vehicle design performance. Before

loading your vehicle, familiarize your‐

self with the following terms for deter‐

mining your vehicle's weight ratings,

with or without a trailer, from the vehi‐

cle's specifications and the certification

label:

Base curb weight

This is the weight of the vehicle includ‐

ing a full tank of fuel and all standard

equipment. It does not include passen‐

gers, cargo, or optional equipment.

Vehicle curb weight

This is the weight of your new vehicle

when you picked it up from your dealer

plus any aftermarket equipment.

Cargo weight

This figure includes all weight added to

the Base Curb Weight, including cargo

and optional equipment.

GAW (Gross axle weight)

This is the total weight placed on each

axle (front and rear) - including vehicle

curb weight and all payload.

GAWR (Gross axle weight rating)

This is the maximum allowable weight

that can be carried by a single axle

(front or rear). These numbers are

shown on the certification label.

The total load on each axle must never

exceed its GAWR.

GVW (Gross vehicle weight)

This is the Base Curb Weight plus actual

Cargo Weight plus passengers.

GVWR (Gross vehicle weight

rating)

This is the maximum allowable weight

of the fully loaded vehicle (including all

options, equipment, passengers and

cargo). The GVWR is shown on the cer‐

tification label.

Overloading

WARNING

Vehicle weight

The gross axle weight rating (GAWR)

and the gross vehicle weight rating

(GVWR) for your vehicle are on the

certification label attached to the

driver's (or front passenger’s) door.

Exceeding these ratings can cause

an accident or vehicle damage. You

can calculate the weight of your load

by weighing the items (and people)

before putting them in the vehicle.

Be careful not to overload your vehi‐

cle.

Driving your vehicle

6-78

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 432 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: