Kia CERATO 2018, Owner'S Manual, Page: 406 / 602

DRIVE MODE INTEGRATED CONTROL SYSTEM (IF EQUIPPED)
DRIVE mode
The mode changes whenever the DRIVE
MODE button is pressed.
❈
When normal mode is selected, it is
not displayed on the cluster.
ECO mode (Active ECO)
Active ECO helps improve
fuel efficiency by control‐
ling certain engine and
transaxle system operat‐
ing parameters. Fuel effi‐
ciency depends on the driv‐
er's driving habit and road
condition.
• When the DRIVE MODE button is
pressed and the ECO mode is selec‐
ted, the ECO indicator (green) will illu‐
minate to show that the Active ECO
is operating.
• When the Active ECO is activated, it
does not turn off even though the
engine is restarted again. To turn off
the system, press the DRIVE MODE
button again.
When Active ECO is activated:
• The acceleration may slightly be re‐
duced eventhough you depress the
accelerator fully.
• The air conditioner performance may
be limited
• The shift pattern of the automatic
transaxle / dual clutch transmission
may change.
• The engine noise may get louder.
• The steering wheel and suspension
may be optimized to smooth handling
and comfortable ride by ECS.
The above situations are normal condi‐
tions when the active eco system is ac‐
tivated to improve fuel efficiency.
Limitation of Active ECO operation:
If the following conditions occur while
Active ECO is operating, the system op‐
eration is limited even though there is
no change in the ECO indicator.
• When the coolant temperature is low:
The system will be limited until en‐
gine performance becomes normal.
• When driving up a hill:
The system will be limited to gain
power when driving uphill because
the engine torque is restricted.
• When using manual mode:
The system will be limited according
to the shift location.
• When the accelerator pedal is deeply
depressed for a few seconds:
The system will be limited, judging
that the driver wants to speed up.
Driving your vehicle
6-52