Kia CERATO 2018 Owner'S Manual Download Page 398

Page: 398 / 602

(Continued)

• Your vehicle is designed to activate

according to the driver’s intention,

even with the VSM installed. Al‐

ways follow all the normal precau‐

tions for driving at safe speeds for

the conditions – including driving in

inclement weather and on a slip‐

pery road.

• Driving with varying tire or wheel

sizes may cause the VSM system

to malfunction. When replacing

tires, make sure they are the

same size as your original tires.

ESS : Emergency Stop Signal (if

equipped)

The Emergency Stop Signal system

alerts the driver behind by blinking the

stop light when the vehicle suddenly

stops or when the ABS activates in

emergency braking. (The system acti‐

vates when the vehicle speed is over 55

km/h and the vehicle deceleration is

over 7 m/s² or the ABS activates when

the vehicle emergency braking.)

When the vehicle speed is under 40

km/h and the ABS deactivates or the

emergency braking situation is over,

the stop light blinking will stop. Instead

the hazard warning flasher will turn on

automatically.

The hazard warning flasher will turn off

when the vehicle speed is over 10 km/h

after the vehicle has stopped. Also, it

will turn off when the vehicle drives at

low speed for some time. You can turn

it off manually by pushing the hazard

warning flasher switch.

CAUTION

The Emergency Stop Signal system

will not work if the hazard warning

flasher is already on.

Hill-start assist control (HAC) (if

equipped)

A vehicle has the tendency to slip back

on a steep hill when it starts to go af‐

ter stopping. The Hill-start Assist Con‐

trol (HAC) prevents the vehicle from

slipping back by operating the brakes

automatically for about 2 seconds. The

brakes are released when the accelera‐

tor pedal is depressed or after about

2 seconds.

WARNING

The HAC is activated only for about

2 seconds, so when the vehicle is

starting off always depress the ac‐

celerator pedal.

NOTICE

• The HAC does not operate when

the transaxle shift lever is in the P

(Park) or N (Neutral) position.

• The HAC activates even though

the ESC is off but it does not acti‐

vate when the ESC has malfunc‐

tioned.

Driving your vehicle

6-44

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 398 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: