Kia CERATO 2018 Owner'S Manual Download Page 394

Page: 394 / 602

Electronic stability control (ESC)

(if equipped)

The Electronic Stability Control (ESC)

system is designed to stabilize the ve‐

hicle during cornering maneuvers. ESC

checks where you are steering and

where the vehicle is actually going. ESC

applies the brakes on individual wheels

and intervenes with the engine man‐

agement system to stabilize the vehi‐

cle.

WARNING

Never drive too fast according to the

road conditions or too quickly when

cornering. Electronic Stability Control

(ESC) will not prevent accidents. Ex‐

cessive speed in turns, abrupt ma‐

neuvers and hydroplaning on wet

surfaces can still result in serious ac‐

cidents. Only a safe and attentive

driver can prevent accidents by

avoiding maneuvers that cause the

vehicle to lose traction. Even with

ESC installed, always follow all the

normal precautions for driving - in‐

cluding driving at safe speeds for the

conditions.

The Electronic Stability Control (ESC)

system is an electronic system de‐

signed to help the driver maintain vehi‐

cle control under adverse conditions. It

is not a substitute for safe driving

practices. Factors including speed, road

conditions and driver steering input can

all affect whether ESC will be effective

in preventing a loss of control. It is still

your responsibility to drive and corner

at reasonable speeds and to leave a

sufficient margin of safety.

When you apply your brakes under

conditions which may lock the wheels,

you may hear a tik-tik sound from

the brakes, or feel a corresponding sen‐

sation in the brake pedal. This is normal

and it means your ESC is active.

NOTICE

A click sound may be heard in the

engine compartment when the vehi‐

cle begins to move after the engine

is started. These conditions are nor‐

mal and indicate that the Electronic

Stability Control System is function‐

ing properly.

ESC operation

ESC ON condition

• When the ignition is

turned ON, ESC and ESC

OFF indicator lights illu‐

minate for approxi‐

mately 3 seconds, then

ESC is turned on.

Driving your vehicle

6-40

Summary of Contents for CERATO 2018



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CERATO 2018

Reviews:

Kia CERATO 2018, Owner'S Manual, Page: 394 / 602

Search results

Summary of Contents for CERATO 2018

Reviews: